Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable partsMfg Part Number: 751559
NSN : 5905-00-475-4254
NIIN : 004754254
CAGE Code : 04454
Manufacturer: Sensor Systems Inc
Item Name : Resistor Variable Wire Wound Non
FSC : FSC 5905 Resistors
If you’re in need of NSN parts, look no further than NSN Orbit. Owned and operated by ASAP Semiconductor, we have access to an unparalleled inventory of parts and components for the aerospace, civil aviation, defense, electronics, and industrial markets. This includes parts such as Resistor Variable Wire Wound Non from Sensor Systems Inc, as well as part numbers like 751559 and many more. NSN Orbit has more than two billion new and obsolete parts readily available with short lead times and competitive prices, and as we are an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited business, and the only independent distributor with a strict No China Sourcing Pledge, each part we sell is fully traceable or comes directly from the manufacturer.
Our website offers an array of parametric search capabilities that allow our customers to search for parts through a number of filters, one of which is the National Stock Number, or NSN. A National Stock Number is an identifier applied to any item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system. NSN Orbit has a broad selection of NSN parts such as 5905004754254 from manufacturers like Sensor Systems Inc. To begin the purchasing process immediately, submit an RFQ today for part number 751559.
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXF | SHAFT LENGTH | 0.656 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.6200 INCHES NOMINAL |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 14.0 KILOHMS SINGLE SECTION |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
| ABPA | UNDERCUT DIAMETER | 3.500 INCHES NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES |
| AAVL | PILOT DIAMETER | 1.2500 INCHES NOMINAL |
| AEDA | MOUNTING LIP DEPTH | 0.6200 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.6200 INCHES NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -50.0/+50.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -2.0/+2.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 7000.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 80045-751559 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| ADAQ | BODY LENGTH | 1.812 INCHES NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 1.50 INCH-OUNCES |
| ABWV | SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 5.000 INCHES NOMINAL |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AAPN | SECTION QUANTITY | 1 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 3.500 INCHES NOMINAL |
| ABNB | FIRST FLAT LENGTH | 0.250 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 80.0 SINGLE SECTION |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| ABNC | FLAT HEIGHT | 0.219 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, FLATTED |
| AECZ | MOUNTING LIP DIAMETER | 5.0000 INCHES NOMINAL |
|
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org" rel="nofollow") and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
