Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable partsMfg Part Number: CM45310
NSN : 5905-01-310-6824
NIIN : 013106824
CAGE Code : 12697
Manufacturer: Clarostat Sensors And Controls
Item Name : Resistor Variable Nonwire Wound
FSC : FSC 5905 Resistors
If you’re in need of NSN parts, look no further than NSN Orbit. Owned and operated by ASAP Semiconductor, we have access to an unparalleled inventory of parts and components for the aerospace, civil aviation, defense, electronics, and industrial markets. This includes parts such as Resistor Variable Nonwire Wound from Clarostat Sensors And Controls, as well as part numbers like CM45310 and many more. NSN Orbit has more than two billion new and obsolete parts readily available with short lead times and competitive prices, and as we are an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited business, and the only independent distributor with a strict No China Sourcing Pledge, each part we sell is fully traceable or comes directly from the manufacturer.
Our website offers an array of parametric search capabilities that allow our customers to search for parts through a number of filters, one of which is the National Stock Number, or NSN. A National Stock Number is an identifier applied to any item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system. NSN Orbit has a broad selection of NSN parts such as 5905013106824 from manufacturers like Clarostat Sensors And Controls. To begin the purchasing process immediately, submit an RFQ today for part number CM45310.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-310-6824 Item Description: Resistor Variable Nonwire Wound | 5905 | 013106824 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Cm45310 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 255.0 MINIMUM AND 265.0 MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| CSDL | STANDARD TAPER CURVE PER SECTION | F SINGLE SECTION |
| ABPM | BODY DIAMETER | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AAPN | SECTION QUANTITY | 1 |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.095 INCHES MINIMUM AND 0.105 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| ABXF | SHAFT LENGTH | 0.615 INCHES NOMINAL |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 120.0 SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 2.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEDX | SHAFT STYLE | ROUND |
| AEFN | NONTURN DEVICE LOCATION | AT 4'30 OCLOCK OR AT 11:00 OCLOCK |
| ABJT | TERMINAL LENGTH | 0.563 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | HAVE QUICK II |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.195 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| CBME | CUBIC MEASURE | 0.106 CUBIC INCHES |
| ABWV | SHAFT DIAMETER | 0.124 INCHES MINIMUM AND 0.126 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ADAQ | BODY LENGTH | 0.468 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | REAR END |
|
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org" rel="nofollow") and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
