Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast All inventory ready to ship from our sellers
Quality guaranteed We sell only warrantied and traceable partsMfg Part Number: 23M358
NSN : 5905-01-212-0039
NIIN : 012120039
CAGE Code : 12697
Manufacturer: Clarostat Sensors And Controls
Item Name : Resistor Variable Nonwire Wound
FSC : FSC 5905 Resistors
If you’re in need of NSN parts, look no further than NSN Orbit. Owned and operated by ASAP Semiconductor, we have access to an unparalleled inventory of parts and components for the aerospace, civil aviation, defense, electronics, and industrial markets. This includes parts such as Resistor Variable Nonwire Wound from Clarostat Sensors And Controls, as well as part numbers like 23M358 and many more. NSN Orbit has more than two billion new and obsolete parts readily available with short lead times and competitive prices, and as we are an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited business, and the only independent distributor with a strict No China Sourcing Pledge, each part we sell is fully traceable or comes directly from the manufacturer.
Our website offers an array of parametric search capabilities that allow our customers to search for parts through a number of filters, one of which is the National Stock Number, or NSN. A National Stock Number is an identifier applied to any item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system. NSN Orbit has a broad selection of NSN parts such as 5905012120039 from manufacturers like Clarostat Sensors And Controls. To begin the purchasing process immediately, submit an RFQ today for part number 23M358.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-212-0039 Item Description: Resistor Variable Nonwire Wound | 5905 | 012120039 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 23m358 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.969 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.031 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 1.000 INCHES NOMINAL |
| AEEA | SWITCH TYPE | ROTARY |
| AEED | SWITCH VOLTAGE RATING IN VOLTS | 125.0 |
| AEFM | MAXIMUM STOP TORQUE | 64.00 INCH-OUNCES |
| AEFP | NONTURN DEVICE RADIUS | 0.305 INCHES NOMINAL |
| AEGH | SWITCH OPERATING POSITION | START OF ROTATION |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CBME | CUBIC MEASURE | 0.379 CUBIC INCHES |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 300.0 NOMINAL |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | 100.0 TO 100.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDK | SWITCH CURRENT TYPE AND RATING IN AMPS | 2.000 AC |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 7 TAB, SOLDER LUG |
| AAPN | SECTION QUANTITY | 1 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 100.000 KILOHMS SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 26512-GR816HB DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| AEGJ | SWITCH CONTACT ARRANGEMENT | DOUBLE POLE, SINGLE THROW, NORMALLY OPEN |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDX | SHAFT STYLE | ROUND |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAT | BODY WIDTH | 0.625 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 0.969 INCHES NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.50 INCH-OUNCES |
| AAQL | BODY STYLE | RECTANGULAR BUSHING MOUNTED |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ADAP | MOUNTING BUSHING LENGTH | 0.250 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 0.625 INCHES NOMINAL |
| AEDZ | SHAFT BEARING TYPE | SLEEVE |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 260.0 NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 1.50 INCH-OUNCES |
| AJYN | SCREW THREAD DIAMETER | 0.250 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | RIGHT-LEFT ADJACENT SIDES |
| CBBL | FEATURES PROVIDED | SWITCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
|
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org" rel="nofollow") and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
